Mr and Mrs Hanlan were downsizing to a smaller home near Stratford-upon-Avon and wanted an efficient heating system to suit it. We fitted a Stiebel Eltron WPL-A 07 air source heat pump to run their underfloor heating and radiators, and did all the heating, plumbing and electrics.
At a glance
| Location | Near Stratford-upon-Avon, Warwickshire |
| Property | Modern five-bedroom house |
| Heat pump | Stiebel Eltron WPL-A 07 air source, flow temperatures up to 75°C |
| Heat emitters | Underfloor heating and radiators |
| Ventilation | MVHR, installed with Heat & Energy Project Management |
| Our work | Heat pump, heating, plumbing and electrics, including three bathrooms, utility room and kitchen |
| Installed | 2022 |
The brief
With their children moved out, Mr and Mrs Hanlan were downsizing to a home for just the two of them. It was their first project of this kind, and they wanted help choosing a heating system that suited the house and their needs.

What we designed and why
We first recommended the Stiebel Eltron WPL 17. Before installation, Stiebel Eltron released the WPL-A 07, which is more efficient and can reach flow temperatures of up to 75°C, similar to a gas or oil boiler. It was a better fit for the Hanlans, so we switched to it. The house is heated by a mix of underfloor heating and radiators.
We worked with Heat & Energy Project Management to install the MVHR system. Our engineers also did all the heating, electrics and plumbing, including three bathrooms, the utility room and kitchen.

The outcome
Mr and Mrs Hanlan chose us because Pete was happy to talk things through at length, even in the evenings, explaining the technical side and answering their questions.
Using underfloor heating and radiators with a heat pump
Many homes, like this one, use underfloor heating on some floors and radiators on others. A heat pump can run both. Underfloor heating works at lower water temperatures, which suits a heat pump well. Radiators usually need a slightly higher temperature, or need to be larger, to give out the same heat.
The design has to make sure every room gets enough heat while keeping the water temperature as low as possible, because the lower the flow temperature, the more efficiently the heat pump runs. Zoning and controls let each part of the system work at the right temperature.
Frequently asked questions
Can an air source heat pump run underfloor heating and radiators together?
Yes. The system is designed so that both get water at a suitable temperature. Some radiators may need upgrading so they can heat the room at heat pump temperatures. We check every room as part of the heat loss calculation.
What is MVHR, and does it help a heat pump?
Mechanical ventilation with heat recovery (MVHR) brings fresh air into the house and takes stale air out, recovering most of the heat from the outgoing air. In a well-sealed modern home, it keeps the air fresh without wasting the heat the heat pump has produced.
How hot can a heat pump heat water?
Many modern air source heat pumps reach around 55°C, and some, like the Stiebel Eltron WPL-A 07, can reach up to 75°C, similar to a boiler. Higher temperatures use more electricity, though, so we design systems to run at the lowest temperature that keeps the house warm.
Should a heat pump run all the time?
Heat pumps usually work best running steadily at a low temperature, rather than switching on and off like a boiler. This is especially true with underfloor heating, which is slow to warm up. Steady running keeps the house comfortable and running costs down.
Related
Read more about air source heat pumps, find out how much a heat pump costs, or browse more projects.
