Last updated: October 2026
Over time, the water in your heating system picks up sludge, rust and debris. That build-up settles in radiators and pipes, blocks valves and makes the whole system work harder. A system flush cleans it out.
When should a system be flushed?
- When a new heat pump or boiler is fitted. Most manufacturers require the system to be cleaned at installation to keep the warranty valid.
- When the filter shows heavy debris. We check this at every annual service.
- When radiators have cold spots, usually cold at the bottom and warm at the top, which is a sign of sludge.
Clean water matters even more with a heat pump. Heat pumps run at lower flow temperatures and rely on good circulation, so a dirty system can noticeably reduce efficiency.
Fit a filter
A magnetic system filter catches debris before it reaches the heat pump or boiler. Many manufacturers offer a longer warranty if a filter is fitted at installation. If your system doesn’t have one, we recommend it.
What we do at your service
At every annual service our engineer checks your filter. What we find tells us how clean your system is, and we’ll recommend one of three things:
- Cleaning the filter, if the build-up is light
- Chemical dosing, to treat the water and protect against corrosion
- A full system flush, if the system is heavily contaminated
Keeping your system clean protects your investment, keeps running costs down and extends the life of the heat pump or boiler.
What happens during a system flush?
There are two main ways to clean a heating system. A chemical flush adds a cleaning solution to the system water, circulates it to loosen sludge and scale, then drains and refills the system. A power flush uses a dedicated pump to push water and cleaner through the system at high flow, working through the radiators one by one to shift heavier build-up.
Either way, the system is refilled with clean water and an inhibitor, a treatment that protects the pipes, radiators and heat pump or boiler from corrosion. A power flush on a typical home usually takes most of a day, depending on its size and condition.
The industry code of practice for cleaning and protecting heating water is BS 7593:2019, which covers how systems should be prepared, cleaned and maintained.
Frequently asked questions
How do I know if my system needs flushing?
- radiators that are cold at the bottom and warm at the top
- radiators that take a long time to heat up
- dark or discoloured water when you bleed a radiator
- a noisy boiler or heat pump, or pumps that keep failing
- a filter that fills with debris between services
Does a new heat pump need a system flush?
Yes. Before a new heat pump is connected to existing radiators and pipework, the system should be cleaned so that old sludge doesn’t end up in the new heat pump. Most manufacturers require this to keep the warranty valid.
How often should a heating system be flushed?
There’s no fixed timetable. A well-protected system with a filter and the right inhibitor levels can go many years without a flush. We check the filter and water condition at every service and only recommend a flush when the system needs one.
Will a system flush fix cold radiators?
Often, if sludge is the cause. Cold spots can also come from air in the system or radiators that aren’t balanced, so we check for these first.
To book a service or ask about flushing your system, contact us or call 01242 323923.
